- Home
- Dressage Tack
- Bits
- English Horse Bits
- Ovation® Elite Loose Ring Snaffle Bit 16MM
Ovation® Elite Loose Ring Snaffle Bit 16MM
Rambo Blanket Trade-In
Thank you for your trade-in!
Code CM18RAMBO2 has been applied. Discount on eligible products will be applied in your cart.
Attention: Nichole Andrews or Ellie Monteith
400 Broadway
Methuen, MA 01844
52 Ash St
West Newbury, MA 01985
To find the right size bit for your horse or pony, consider both the length of the mouthpiece and the width of the mouthpiece in combination with the conformation of your horse's mouth.
Length of the Mouthpiece
Bit length corresponds to the width of your horse's mouth. This measurement is usually provided in inches and fractions of an inch, such as 5 inch or 5 1/2 inch.
When attached to an appropriately adjusted bridle, a bit should rest comfortably at the corners of a horse's mouth and shouldn't press too hard against a horse's face. This would indicate the bit length is too short, and the horse may feel pinching at the sensitive corners of his mouth.
Conversely, if you see a 1/2 inch or more on each side between the lips and bit rings, the bit is too long. A bit that is too long can slip sideways in a horse's mouth, becoming ineffective and causing soreness.
The specific type of bit you choose will influence slightly the desirable bit length. A full cheek snaffle, Pelham or elevator bit should sit snuggly next to your horse's cheeks, but should not squeeze or pinch. For a loose ring snaffle or any bit with moveable rings, make sure that your horse's lips completely clear the bit ring holes by 1/8 inch on each side. Otherwise, the horse's skin can become pinched into the holes as the action of the loose rings works with the reins.
Measure your horse's mouth to determine the length of bit required in either of two ways:
- A Bit Sizer, simple but accurate, is a plastic device that measures in inches and corresponds to bit sizes. Take the reading as you would on a ruler. Slide the Bit Sizer across the horse's tongue, resting it against the corners of his mouth. The end piece should rest against one cheek comfortably. At the other side, read the inch measurement at the corner of the mouth.
- Use a piece of string in place of a Bit Sizer if your horse will cooperate. Mark the spots on the string that meet the corners of the horse's mouth, then lay the string against a ruler to obtain your bit length measurement.
As described previously, depending on the type of bit you're selecting, you may want to add 1/4 to 1/2 inch to your measurement.
Width of Mouthpiece
Bit width refers to the bit circumference at the widest part of the mouthpiece. This measurement may be in inches or millimeters.
For most horses, the thinner the bit, the more severe its action is on the horse's mouth because the pressure from the bit is exerted on a narrower surface. Similarly, in general, the thicker the bit, the more gentle its action on the horse's mouth because the pressure is distributed over a wider surface. With this in mind, also consider the conformation of a horse's mouth when choosing bit width. A bit should never be too thick in relation to the space in a horse's mouth.
The height of the palate (roof of the mouth) plus the thickness of the tongue determines the amount of space available for the bit. You can usually identify the conformation of the horse's mouth by prying open the side of the lips. A small or average sized tongue lies below or level with the bars of the mouth; a thick tongue rises above the bars or spills over the bars and between the teeth.
Your equine dentist, veterinarian or a knowledgeable trainer can help you determine whether your horse's palate is normal or high, which could allow for a thicker bit, or very low, which could reduce the thickness of the bit that may be used.
Clean your horse's bit routinely after every ride. Any dried spit or food particles left to harden on a bit become abrasive and uncomfortable to your horse's mouth. With regular cleaning you're not only ensuring your horse's comfort, you�re also ensuring that the moving parts of the bit, such as the cheek or ring joints or center lozenges, function as smoothly as intended.
Give the bit a good rinse with water and wipe it thoroughly with a clean rag. Alternatively, use flavored Horse Amour® Bit Wipes. These pre-moistened, disposable wipes remove grime quickly and leave a pleasant taste for your horse to enjoy at the next bridling.
Over time, bits may become tarnished from use and exposure. Use a non-toxic, non-acidic metal polish such as Herm Sprenger® Diamond Paste to remove tarnish gently. Developed for use on bit mouthpieces and all types of metal, HS Diamond Paste helps prevent tarnish from recurring. If you use any other type of metal polish, be sure to wash the bit thoroughly with water to remove any trace of the product.
100% Satisfaction Guarantee
The Easiest and Best Guarantee in The Business
Shop with 100% confidence at Dressage Extensions. If something doesn’t fit you or your horse, return your original purchase within a year, and we’ll make it right with a refund, exchange or replacement.
Our experience as riders and horse owners ourselves is that in most situations a year’s time is fair enough to evaluate proper fit and function. PLUS: For manufacturer’s defects, we’ll extend the manufacturer’s warranty to a maximum of 24 months, regardless of their individual policies. (AND: Manufacturer warranties longer than 24 months will be honored and supported by us as well up to the length of those warranties).
Exceptions: Safety items such as helmets and protective vests may only be returned within 30 days, with their original tags intact. Saddles and riding boots may be returned within the one year period, but are subject to a prorated refund based on usage. Used saddles may be returned for 30 days only. For everyone’s protection, treats and vet meds which have been opened are not returnable, and returned blankets must clean and free of debris.
To protect all customers and ensure that every return or exchange is handled fairly, we may require a receipt or decline a return in these situations:
• Item was not purchased directly from Dressage Extensions. (It was purchased at a used tack sale or from a retailer or online seller other than Dressage Extensions.)
• Item is missing a label or has been defaced.
• No receipt and no valid identification in our stores.
• Item is wet, dirty or contaminated, or until it has been cleaned. (For health and safety reasons, we cannot accept returns on used, defective or poorly fitting blankets if they are UNWASHED.)
• Item has been lost, stolen, damaged, or misused.
• On rare occasions, based on the nature of prior transactions.
• Supplements have been opened or used.
• Multiple returns of the same item.
• Personalized items may not be returned unless defective.
Security Guarantee
Dressage Extensions understands your concerns regarding online security. We share in your concerns and therefore work hard with experts in the field to maintain a highly secure ordering environment. Along with our comment to security, we offer you a Secure Order Guarantee - this gives you 100% protection for your credit card transactions on DressageExtensions.com.
Our Secure Order Guarantee means that you will never have to pay any money related to unauthorized charges to your credit card account, as long as those charges are a direct result from a transaction on DressageExtensions.com.
How it works: If you experience credit card fraud, the Fair Credit Act specifies that your credit card company can hold you liable for no more than $50.00 in fraudulent charges to your account. Our Secure Order Guarantee will reimburse you for any amount up to $50.00 billed to you by your credit card company for unauthorized charges to your account, if those charges result from an order you placed with DressageExtensions.com. For this protection you must promptly notify your credit card company of fraudulent charges and follow their procedures as outlined in your credit card agreement.
The Ovation® Elite Loose Ring Bit has an 16mm mouthpiece that's made of copper-enhanced German silver to help stimulate salivation and encourage bit acceptance. The high copper formula also helps prevent dry mouth, yet retains the appearance and durability of German silver. 70mm stainless steel rings.
Imported.
Manufacturer Restricted Price Product: Count on Dressage Extensions for the best quality, value and price possible. However, some of our manufacturers restrict advertised selling prices and prevent us from advertising discounts. For other items, some manufacturers allow us to offer and advertise a discount on a limited basis. Therefore, some products are not eligible for discounts.
Ovation® Elite Loose Ring Snaffle Bit 16 MM
| Size | MOUTHPIECE THICKNESS (MM) | MOUTHPIECE THICKNESS (IN.) | RINGS (MM) | RINGS (IN.) |
|---|---|---|---|---|
| 5" | 16 | .63" | 70 | 2.76" |
| 5 ½" | 16 | .63" | 70 | 2.76" |