Skip to Main Content Skip to Footer Content
Shop All Kavalkade Shop All Kavalkade

Rambo® Micklem® Competition Bridle

Rambo® Micklem® Competition Bridle 0012976_2.jpg 0012976_3.jpg
Colors/Options: Black Dark Havana

Rambo® Micklem® Competition Bridle

The Rambo® Micklem® Competition Bridle was designed for use in competition as a bitted bridle; softly padded crownpiece, browband and noseband have a show-ready look.

Read more…
Competition Bridle
Item #: X1-12976
List: $219.00
Our Price:
Ships in 2-5 Business Days
Helpful Information
How to Clean
Sizing Info
How to Measure
Nameplate Attachment Instructions
Our Guarantee

Based on the popular original design, the Micklem® Competition Bridle* is intended for use in competition as a bitted bridle. It's made from high-quality, hand-rubbed leather. Single crownpiece, browband and noseband are softly padded for horse comfort.

The D-ring has been removed from the noseband for a cleaner, show ring ready look. Stainless steel hardware. Rubber reins included.

*FEI approved for use in dressage where snaffle bridles are permitted. Suitable for show jumping and cross country competition. Check with your individual organization for other eligibility.


Manufacturer Restricted Price Product: Count on Dressage Extensions for the best quality, value and price possible. However, some of our manufacturers restrict advertised selling prices and prevent us from advertising discounts. For other items, some manufacturers allow us to offer and advertise a discount on a limited basis. Therefore, some products are not eligible for discounts.

How to Clean Your Bridle

Properly caring for your bridle and reins supports maximum performance, longevity your horse's comfort.

After every ride, you'll want to wipe any grime, sweat, saliva and ring dust from your bridle and reins and use either traditional glycerin soap and water or a specially formulated leather cleanser.

Pay particular attention to cleaning areas of your bridle that are typically under pressure during riding and exposed to saliva, such as the ends of cheek pieces and reins where they come in contact with bit rings.

For a traditional and economical method, glycerin soap, a small bucket and a sponge or cloth works great. Barely moisten the sponge with cool water. Unfasten hook stud closures and buckles to remove debris caught by the hardware and to smooth creases in your leather.

After washing, and when the leather feels smooth and clean, rub a nearly dry sponge or rag against the glycerin soap bar. Apply a thin layer of glycerin soap (no suds during this step) to your leather to seal its pores and keep it soft, but not sticky.

Newer methods of cleaning your bridle involve convenient and easy-to-use tack cleaning and conditioning products. Almost every tack manufacturer has a recommendation or product preference for cleaning and conditioning its products, and some manufacturers produce their own. Always follow manufacturer's guidelines when considering commercial leather cleaners and conditioners.

One-step leather cleaners also condition your leather as you wipe away grime. Two-step cleaners usually advise following cleansing with a conditioner that will soften and protect the leather.

For a properly fitted bridle, a caveson noseband should sit just below the horse's cheekbones ?o?e??C? generally no more than the width of 2 fingers from the bottom of the cheekbone to the top of the noseband (this does not apply to drop or figure 8 nosebands). Figure 8 nosebands should sit above the bottom of the cheek bone only if they have a ring that allows movement connecting the noseband to the cheek piece. The browband should never be gaping or flopping. Click Here for more information and examples.

Properly adjusted cheek pieces will cause the bit to create two gentle wrinkles at the corner of the mouth on each side. Cheek piece buckles should generally be at the level of a horse's eye, and on a bridle that fits a horse's head very well, all buckles will generally be at the same level as each other. These cheek piece guidelines are just a suggestion, as finding a perfect fit on all horses is near impossible. Multiple holes are given on cheek pieces to allow for vast adjustment. Keep in mind that the proper position of the bit is a priority over buckle placement. Click Here for more information and examples.

Some horses can be difficult to fit in a stock size bridle. For this reason, additional bridle pieces can be bought in a variety of sizes and it is never a problem to mix and match sizes of individual pieces to get the proper fit.

For a bridle size chart, please refer to the "Size Guide" link that appears on the product page.

1) Crownpiece
Measure the length of crownpiece (with cheek pieces) required by measuring from one corner of your horse's mouth, over the poll, to the other corner of his mouth.

2) Browband
Measure the length of browband required by measuring from the back edge of the horse's ear, around his forehead, to the back edge of his other ear.

3) Noseband
Measure the length of noseband required by measuring around your horse's muzzle at a point about one inch below his cheekbones.

4) Throat Latch
Measure the length of throat latch required by measuring from back of your horse's ear, under his throat, to the back of his other ear.

Tip: Leather bridle parts may stretch slightly over time with use and conditioning. Factor possible slight stretching into your sizing decision as you select a bridle so that you can be sure it won't become too big for your horse.
How to Attach a Nameplate to a Halter, Bridle, Martingale or Breastplate

Required Tools: will need a leather hole punch, hammer and pencil.

1. Unwrap your nameplate and identify the rivets as having two posts and two caps.
2. Center the plate where you would like it ; mark its holes with pencil.
3. Use the hole punch centered on the pencil marks. A good quality hole punch with appropriate pressure applied should be able to penetrate even thick leather halters.
4. Push the rivet posts through the back of the tack so the posts are pointed toward you.
5. Put the nameplate on rivet posts.
6. Place rivet caps onto the posts, and tap the caps with a hammer.

Note: If you do not feel comfortable installing your own nameplate, we are happy to help. Bring your plate and tack into your local Dover Saddlery store for assistance. Your local leather repair professional or cobbler may also be able to assist you.